Slot car racing club Melbourne | Routed wooden track slotcar racing group Victoria |
1-32 & 1-24 scale slot cars | Ninco, Scalextric, SCX, Carrera, Fly, Slotit | Plafit True scale slotcars
|
 |
1:32 & 1:24 SLOTCAR RACING
JOIN US TODAY BURN RUBBER
TOMORROW |
 |
 |
|
|
|
 |
|
|
|
| HOLDEN FJ / FX |
 |
BODY
- Any Sunset 1:24 Vacuum formed Polycarbonate or Lexan or PET true scale Holden FJ/FX body.
- Minimum body thickness is .030” ( Excluding Window Thickness )
- Trimming and body mounting has to reflect the actual 1:1 car.
- The presentation, colour scheme & decals all have to be as realistic as an FJ/FX of the same period.
- The body has to cover the entire chassis including the guide and tyres as viewed from above.
CHASSIS
- Only Plafit #1300U chassis kits, Plafit #1700 Chassis kit, MJK FJ/FX Chassis kit.
- The Chassis may also be scratch built from brass and piano wire.
- No Flexi car chassis or Flexi car chassis components allowed.
- Total minimum weight of the complete car during the whole race is 130 grams
- Chassis may use and mix Plafit or MJK interchangeable parts.
- Weight may be added.
FRONT AXLE
- Any 3/32”, 1/8” or 3mm solid front axle.
- Independent front axles allowed.
- Oilite bushings or bearings allowed.
REAR AXLE
- Any 3/32”, 1/8” or 3mm solid rear axle.
- Maximum overall axle / tyre width is 71mm.
- Oilite bushings or bearings allowed.
FRONT WHEELS - ( No Silicon Tyres! )
- Minimum rim diameter is 15.0mm.
- Minimum tyre and rim diameter is 24.0mm.
- Tyres must be made from black rubber or black sponge rubber.
- Minimum tyre and rim width is 6.0mm
- Maximum tyre and rim width is 9.0mm.
REAR WHEELS - ( No Silicon Tyres! )
- Minimum rim diameter is 15.0mm.
- Minimum tyre and rim diameter is 25.0mm.
- Tyres must be made from black rubber or black sponge rubber.
- Traction glue (goo) and tyre conditioners/solutions are prohibited. Only shellite only is allowed.
- Minimum tyre and rim width is 8.0mm
- Maximum tyre and rim width is 13.0mm
CLEARANCE
- Minimum 1.00mm clearance under the entire chassis at the start of the race.
- Cars may be inspected at any time during the race or at the discretion of the Race Director.
INTERIOR
- The interior/driver must cover the entire interior.
- No part of the chassis must be visible through the windows.
- Vac. formed interior with a drivers head attached.
- The interior should be properly detailed in at least 3 colours.
GUIDE
- Any commercially available plastic or graphite guide flag.
- Only one guide per car.
- Guide clips are allowed.
- Any lead wire.
GEARS
- Any Pinion.
- Any Spur or Crown ( Contrate ) gear.
MOTOR
- Only 13D #8635 Plafit Fox II Motor only.
- The Original lettering “PLAFIT FOX II” has to be visible.
- The sealed motors are not be tampered with or modified in any way.
- The motor may be soldered, glued or fastened with screws to the chassis.
Page Top
|
|
|
 |
|
|
|
